Suction Caddy

Features

Easy to use and attaches to most smooth surfaces
Keeps suction devices and tubing close at hand and off the floor
Convenient, designated write-on area for patient name and date
Clear plastic allows for better visibility
Tubing anchor helps to reduce noise
Large suction cups provide strong hold and allow for easy removal
Not made with natural rubber latex or plasticizer DEHP
Individually packaged

Keep suction devices like the Neotech Little Sucker securely within reach and neatly off the floor with the Suction Caddy. The Suction Caddy includes a tubing anchor to help reduce noise and can be safely attached and removed from nearly any smooth surface, including the exterior of an incubator. The designated write-on area for the patient’s name and date and easy-to-remove suction cup attachment make the Suction Caddy convenient.

Directions for Use

Step-1: Affix Suction Caddy to a smooth, flat surface by pressing nubs of suction cups firmly.
Note: Ensure that compartment opening is facing up.
Step-2a: If disconnecting suction device from tubing, place device in Suction Caddy compartment and slip open end of tubing over tubing anchor.
Step-2b: If keeping suction device and tubing connected, place connected device into Suction Caddy compartment.
Step-3: To remove Suction Caddy from surface, lift suction cup tabs.
Step-4: Replace Suction Caddy every 72 hours or per hospital protocol, whichever is sooner.
Caution: Replace immediately if visibly soiled.

INDICATIONS FOR USE

The Suction Caddy is intended to hold and store a suction device.

CAUTIONS & WARNINGS

The Suction Caddy is designed for use with Neotech suction devices specifically. It may not accommodate other suction devices.
The Suction Caddy and suction cups should be kept clean and free of debris and fluids.
Replace immediately if visibly soiled or damaged.
Tabs should always be removed when NeoShades are taken off the patient. Do not reuse.
Single patient use only.