Hold-A-Line™
Catheter and Tubing Holder
Features
- Skin friendly NeoBond® Hydrocolloid base
- Fold over flap designed to relieve stress on tubes and help prevent dislodgement
- Unique shape allows for protruding umbilical stump
- Flap designed to be opened and closed repeatedly
- Clear flap allows for better visibility
- Not made with natural rubber latex or plasticizer DEHP
Keep tubing and catheters safe and secure with Neotech’s innovative Hold-A-Line. Made with a gentle NeoBond Hydrocolloid base, this product is skin friendly and ideal for infants with sensitive skin. "With its secure fold-over flap, Hold-A-Line not only keeps tubing in place, but also relieves pressure on catheters. The unique U-shape means less irritation for protruding umbilical stumps, and the holder can open and close repeatedly. With its clear flap, Hold-A-Line also allows for continued visibility of tubing.
Indications For Use
The Hold-A-Line is designed to anchor and support umbilical catheters and tubing for pediatric patients (neonates, infants, and children).
Directions for Use
Preparation:
- After the catheter or tube is in place, clean and dry skin per hospital protocol.
- Note:It is important for skin to be as clean and dry as possible. Hold-A-Line will not adhere properly to moist skin or hair. Oils and lotions will also adversely affect adhesion.
- DO NOT USE ALCOHOL.
Application:
- Step-1: Actively warm the hydrocolloid adhesive before removing the plastic liner. Specifically , warming techniques include: hold between the palms of your hands for at least 60 seconds, hold near a radiant warmer for 10-15 seconds, or alternatively , hold against a chemical heel warmer for 10-15 seconds.
- Step-2: Discard the white paper liner, and then peel and discard the clear plastic liner from the hydrocolloid base.
- Step-3: Apply base to skin and hold in place for 60 seconds to ensure proper adhesion.
- Step-4: Peel and discard frosted liner and adhere catheter or tube to base.
- Step-5: Fold flap over catheter or tube, align with base and press firmly together, enclosing catheter or tube between adhesives.
- Step-6: Lift flap as needed to reposition or remove catheter or tube.
Removal
- Step-1: Replace Hold-A-Line every 5 days or per hospital protocol, whichever is sooner.
- Step-2: Lift flap to remove catheter or tube.
- Step-3: Saturate Hold-A-Line with water or saline.
- Step-4: Slowly peel Hold-A-Line away from skin as you swab the skin with water or saline.
Cautions & Warnings
- Federal law restricts this device to sale by or on the order of a physician.
- Hold-A-Line should only be used, therefore, while the patient is under the continuous, direct supervision of trained healthcare professionals.
- Discontinue immediately if skin irritation occurs.
- Hold-A-Line will not adhere properly to moist skin or hair. Oils and lotions will adversely affect adhesion.
- Do not use alcohol to clean skin prior to application.
- Single patient use only.
Specifications
| Cat No. | Colour/Item | Qty/Unit |
| N705 | Standard | 40/box |
Downloads
Sell Sheet
Directions For Use (IFU)
Related Products
