EZ-Hold Tubing and Cannula Holder

Features

Skin friendly NeoBond® Hydrocolloid base
Fold over flap engineered to relieve stress on tubes
Flap designed to be opened and closed repeatedly
Clear flap allows for better visibility
Mini size and shape ideal for micro preemies
Not made with natural rubber latex or plasticizer DEHP

Help prevent tubing and cannulas from shifting or slipping with Neotech EZ-Hold. All EZ-Hold devices have a NeoBond Hydrocolloid base, which is less likely to irritate sensitive skin. The fold-over flap is engineered for repeated openings and closures without affecting the skin. The EZ-Hold’s innovative clear flap enables visibility, and it’s made with no natural rubber latex or plasticizer DEHP.

Directions for Use

Preparation

Step-1: Clean and dry skin per hospital protocol.
Note: It is important for skin to be as clean and dry as possible. EZ-Hold will not adhere properly to moist skin or hair. Oils and lotions will also adversely affect adhesion.
DO NOT USE ALCOHOL.

Application

Step-1:Before removing liners, warm EZ-Hold in hands for 60 seconds. May also be held under radiant or heel warmer for 10 to 15 seconds.
Step-2: Discard white, paper liner, then peel and discard clear, plastic liner from hydrocolloid base.
Step-3:Apply base to skin and hold in place for 60 seconds to ensure proper adhesion.
Step-4: Peel and discard second liner and fold flap over tubing.

Removal:

Step-1: Replace EZ-Hold every 5 days or per hospital protocol, whichever is sooner.
Step-2:Lift flap to remove tubing.
Step-3: Saturate EZ-Hold with water or saline.
Step-3: Slowly peel EZ-Hold away from skin as you swab with water or saline.

INDICATIONS FOR USE

The EZ-Hold is intended to anchor and support breathing tubes.

CAUTIONS & WARNINGS

Discontinue immediately if skin irritation occurs.
EZ-Hold will not adhere properly to moist skin or hair. Oils and lotions will also adversely affect adhesion.
Do not use alcohol to clean skin prior to application.
Single patient use only.