Radiolucent NeoLead

Features

Pre-wired electrodes
Hydrogel center
NeoBond® Hydrocolloid border designed to:
- Prevent hydrogel from oozing or drying prematurely
- Provide sensor stability for better tracings
- Minimize slipping
Multi-colored wires for easier identification
Not made with natural rubber latex or plasticizer DEHP
Sets of three individually packaged

The NeoLead Standard ECG electrodes feature a hydrogel center and, furthermore, a hydrocolloid border that is specifically designed to prevent the hydrogel from oozing or, in addition, drying out prematurely. Slipping is minimal, providing more sensor stability for better tracings. The NeoLead Standard is not made with natural rubber latex or the plasticizer DEHP, reducing the risk of an allergic reaction. Clinicians, therefore, praise this product as an affordable ECG solution, primarily due to its long-lasting adhesion.

Directions for Use

Preparation:

Clean and dry skin per hospital protocol.
Note: It is important for skin to be as clean and dry as possible. Electrodes will not adhere properly to moist skin or hair. Oils and lotions will also adversely affect adhesion.
DO NOT USE ALCOHOL.

Application:

Step-1: Before removing liner, warm the lead in hands for 60 seconds. May also be held under radiant warmer or heel warmer for 10 to 15 seconds.
Step-2: Peel and discard liner.
Step-3: Slowly peel the lead away from the skin as you swab with water or saline.

Removal:

Step-1: Replace NeoLead every 5 days or per hospital protocol, whichever is sooner.
Step-2: Saturate the lead with water or saline.
Step-3: Slowly peel the lead away from the skin as you swab with water or saline.

INDICATIONS FOR USE

The intended use of the NeoLead® ECG Electrodes is for ECG monitoring on pediatric patients, including neonates, infants, and children.

CAUTIONS & WARNINGS

Federal law restricts this device to sale by or on the order of a physician.
Healthcare professionals should, therefore, continuously supervise the patient when using NeoLead® ECG Electrodes.
Electrodes will not adhere properly to moist skin or hair. Oils and lotions will adversely affect adhesion.
Do not use alcohol to clean the skin prior to application.
Do not use NeoLead (N300, N301) during x-ray or MR procedures.
Discontinue immediately if skin irritation occurs.
Disposable. Do not reuse.
Single patient use only.